I assume the bottom line is that I am just truly thinking about what is going on on. I'm in no hurry to vaporize my gun and fingers, but I intention to do some really serious testing as soon as I have a chronograph.
In my by no means to get humble impression, amongst the finest powders available for 20 and 28 ga masses with Riefenhauser hulls. Is effective pretty properly in higher velocity and major shot loads in the massive bores.
Increase to quote Only demonstrate this consumer #four · Jun six, 2021 If both equally are discontinued, then It could be a tragedy. If that's so, it would not appear mainly because they were not offering. Today they might possibly promote all that they may make.
I would believe the "why" would be the compact diameter with the bushing hele nd the flakes jamming up wanting to get in there effectiely. I've thrown it on the metallic powder measure in modest'ish quantities and it was Okay, not great.
Shut your eyes And picture you wander into your preferred provide retail store as well as shelves are all full of powder, an array of powder. (Great dream huh? ). Your pockets are full of $$ and price tag isn't any item.
This can be an more mature thread, you might not receive a response, and will be reviving an outdated thread. Be sure to take into consideration creating a new thread.
I believe he previous C.U.P. method was probably more specific determined by the crushed copper disk of acknowledged compressive forces. This was slow and will only be use the moment for each disk which had to be evaluated for a most.
lugmastro explained: Agreed that everybody hates 800x, aside from me. I worked up a good 16ga searching load with it and pheasants 800X powder seem to fall out in the sky pretty well, when my head is within the gun.
Speaking of steel, back while in the ninety's I used a great deal of 800x in steel shot masses applying AA hulls. I shot plenty of ducks and some geese way too. I just made use of some of it to load up some 28 gauge loads for my son. I could have to test some in pistol loads way too.
Once again, this is just a concept, but when It is really anyplace in close proximity to precise, it could bring about some extremely critical unexpected overpressures any time 800X powder a seemingly benign load instantly and unexpectedly gets a 100% burn up and subsequent enormous tension spike.
I would like it just as much for powder as primers. My 28 gauge equipment hundreds 800X as consistant it does Exceptional oe Herco. With out the viberator no these types of luck.
This can be an older thread, you might not receive a response, and will be reviving an previous thread. Please consider developing a new thread.
There are various strategies to obtain this but I just tapped on the side from the bottle until finally the powder wouldn't settle anymore. Then do a powder demand into a shell, cup whatsoever and place that back again in the very best from the bottle. (that charge will probably be way large with powder).
i did have favorable notes on 800x but also had notes that i needed to faucet the powder bottle to obtain consistant drops of powder .